Icom AT-130 HF Automatic Antenna Tuner

The Icom AT-130 HF is an Automatic Antenna Tuner that allows you to tune in your HF marine worldSuitable for many vesselsTheversatile AT-130 can be used with a variety of vessels, even smallerboats that cannot use a long antenna element. For example, the AT-130will match a 7 m (23 feet) long wire antenna across the marine band inthe 1.6 – 27.5 MHz range.Automatic tuningNo manualtuning is needed. Just push the [TUNE] switch on an Icom HF marinetransceiver; the AT-130 adjusts the antenna and the transceiver to theminimum SWR in any frequency on an HF marine band. The AT-130 allows youto transmit with strong RF output power, and is perfect for maritimemobile operations.Weather resistantThe AT-130 ishoused in a durable, completely weather-resistant acrylic case withrubber gaskets. This allows it to be conveniently installed near theantenna element base.For Icom HF marine transceiversIcom’ssophisticated AT-130 easily matches Icom HF marine transceivers. TheAT-130 easily interconnects with an Icom HF marine transceiver. AT-130installation is simple. No adjustments are necessary. Just connect thecontrol cable and antenna wire and go!Quick tune-upImprovedtuning performance…the tune-up time is less than 3 seconds in anyfrequency on an HF marine band. In addition, the AT-130 has 8 convenientmemories to store tuning information. Retuning for a memorizedfrequency takes about 1.5 seconds. This allows you quick trouble-freefrequency changes.Low power tune-upThe AT-130 emitsvery little output power (just 300 mW) during the tuning process. Thisreduces the possibility of causing interference to other stations usingthe frequency.More Features and Specifications